Metal Out Plus

Category:

Description

Description

Metal Out Plus

Removes existing stains and prevents future metal stains on pool surfaces. Sequesters metals in the water to prevent stain and scale formation. Removes or lightens existing discolorations caused by metals and chelates metals to help protect equipment from scale formation.

  • FCH209232 1 qt

Instructions

Instructions

DIRECTIONS FOR USE:

Metal-Out Plus is best used for metallic stain removal and prevention of hard water scaling. It sequesters (picks up) the material causing stains and scale and holds them in solution. If stains persist, they may be old ones requiring complete cleaning of the walls, or stains of an organic nature. Dissolved metals and minerals (such as Iron, Calcium, Manganese, and Magnesium) in pool water and corrosion of metal pool fittings will often cause staining and/or scaling. Do not let pH of pool water fall below 7.0 or serious corrosion problems may result. For scale prevention it is also essential to maintain pH at 7.2 to 7.6, total alkalinity at 100 to 150 ppm, and calcium hardness at 100 to 275 ppm.

STAIN REMOVAL

Before using Metal-Out Plus, adjust pH between 7.2 to 7.6
For best results, use Metal-Out Plus in the evening with pool pump and filter operating overnight.
Add 16 ounces (1/2 bottle) per 10,000 gallons by premixing into plastic pail of water first. Dispense solution at deep end of pool.
Cloudiness may develop with the appearance of white flakes. This is normal indicating Metal-Out Plus is working and cloudiness will eventually disappear.
STAIN AND SCALE PREVENTIVE MAINTENANCE

Follow all steps outlined above for STAIN REMOVAL.
Repeat application of 2 ounces per 10,000 gallons every 4 to 5 days.
HARD WATER NOTE:

In areas with hard water where calcium hardness exceeds 300 ppm, it is advisable to double the dosages listed above. However, DO NOT increase the dosages more than double for one application.