Multi-Chlorinator

Category:

Description

Description

Multi-Chlorinator

Fast dissolving granules are perfect for daily chlorination or super chlorination. Stabilized 99% pure Dichloro-s-triazinetrione provides 56% available chlorine for easy sanitizing.

  • 99% Sodium Dichlor granules
  • Fast, effective, sanitizer & oxidizer
  • Quick dissolving

Available in various sizes to meet your service needs.

Instructions

Instructions

DIRECTIONS FOR USE:

IT IS A VIOLATION OF FEDERAL LAW TO USE THIS PRODUCT IN A MANNER INCONSISTENT WITH ITS LABELING. Read entire label and use strictly in accordance with precautionary statements and directions.

FOR SWIMMING POOL DISINFECTANT:

When used as directed, this product is effective as a swimming pool water disinfecting agent. Ensure all pool equipment is working properly. Backwash the filter system following manufacturer’s directions. Adjust pH to between 7.2 – 7.6. Add stabilizer to establish a minimum level of 30-40 ppm to reduce the degradative effects of sunlight upon the chlorine residual. Check for metals. Before using this product, add stain and scale inhibitor to prevent staining of pool surface due to metals. When using other products as outlined in the directions for this product, always follow directions on those products.

SUPER CHLORINATION:

Super chlorination is necessary at the beginning of the bathing season, whenever the pool is filled, every week during hot weather, and following heavy rain or windstorms. Super chlorinate the pool with a suitable granular product by following directions below or on another product’s label. Keeps pump-filter system running for at least 10 hours after treatment. Frequency of treatment is dependent on ambient temperatures, light intensity, and bather load. DO NOT reenter pool until the chlorine residual has dropped to 1.0 – 3.0 ppm. For super chlorination, broadcast one pound of this product per 10,000 gallons directly into the water in the deep end of the pool. To prevent damage to pool surface, use a pool brush to disperse any granules that may have settled to the bottom of your pool. NEVER ALLOW UNDISSOLVED PRODUCT TO REST IN CONTACT WITH BLEACHABLE POOL SURFACES. In water temperatures less than 70°F, or as an alternate application procedure, dissolve this product prior to applying evenly to the deep end of the pool. Dissolve this product outdoors, in a clean plastic bucket stirring with a clean plastic or wooden spoon. Add this product to water, NEVER add water to this product. NEVER add more than 1 pound of this product to 3 gallons of cool water. Do not mix with other products while dissolving.

MAINTENANCE DOSAGE: With pump running, broadcast 4 ounces of this product per 10,000 gallons directly into the water in the deep end of the pool as an initial treatment. Repeat additions until a residual of 1-3 ppm chlorine is established as determined by the use of a test kit. To prevent damage to pool surface, use a pool brush to disperse granules that may have settled to the bottom of the pool. NEVER ALLOW UNDISSOLVED PRODUCT TO REST IN CONTACT WITH BLEACHABLE POOL SURFACES. Regular use of a test kit is necessary to determine when it is necessary to add another dose of this product to maintain a residual of 1-3 ppm available chlorine in the pool water. An average daily dose requirement is 2-3 ounces of this product per 10,000 gallons of water. After use of this product it is recommended that a preventative algae treatment be added on a weekly basis.

REENTRY INTO TREATED SWIMMING POOLS IS PROHIBITED ABOVE LEVELS OF 3 PPM CHLORINE DUE TO RISK OF BODY INJURY.